Seismic performance limit of nuclear power plant piping system with seismic isolation system considering measurement points: Damage index
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- ENGINEERING FAILURE ANALYSIS130 · #105742 · 2021
- 피인용
- Web of Science 8Scopus 7
- FWCI (Scopus)
- 0.22
- JCR IF
- JCR 2020 3.114
- ISSN
- 1350-6307
저자
- 김성완제1저자교신저자Pusan Natl Univ, Seism Res & Test Ctr, 49 Busandaehak Ro, Yansan 50612, Gyeongnam, South Korea
- 전법규Pusan Natl Univ, Seism Res & Test Ctr, 49 Busandaehak Ro, Yansan 50612, Gyeongnam, South Korea
- Hahm, Dae-GiKorea Atom Energy Res Inst, Smart Struct Safety & Prognosis Div, 111 Daedeok Daero 989 Beon Gil, Daejon 34057, South Korea
- Kim, Min-KyuKorea Atom Energy Res Inst, Smart Struct Safety & Prognosis Div, 111 Daedeok Daero 989 Beon Gil, Daejon 34057, South Korea
초록
This paper presents the second part of a two-part investigation on the seismic performance limits of nuclear power plant piping systems with seismic isolation systems considering the measurement points and aims to quantitatively express these limits using a damage index based on the dissipated energy. This part of the study focuses on a method to quantitatively express the seismic performance limits needed for seismic fragility evaluations of crossover piping systems connecting structures with and without seismic isolation systems in nuclear power plants. Test specimens for this study were manufactured by welding straight pipes to both ends of a 90 degrees long pipe elbow. The dissipated energy was calculated using the relationship between the moment measured at the center of the pipe elbow and relative deformation angle at each of the straight pipe's measurement points using an imaging system; this was compared to the dissipated energy calculated from the relationship between force and displacement, and a suitable length of the straight pipe for low-cycle fatigue tests was found. Further, a method of applying a weighting factor to the yield points, which are needed to calculate the damage index, are examined; thus, it was confirmed that the damage index can be used to quantitatively express the seismic performance limits of thin-walled steel pipe elbows.
키워드
Nuclear power plant piping systemPipe elbowSeismic performance limitDissipated energyDamage indexLOW-CYCLE FATIGUEELBOWSMOMENTFAILURE
식별자
- Scopus EID
- 2-s2.0-85115338910
- WoS UID
- 000700589300004



로그인
연구물 목록으로