본문 바로가기

Defect Imaging Enhancement through Optimized Shape Factors of the RAPID Algorithm Based on Guided Wave Beam Pattern Analysis

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
SENSORS21(12) · 2021
피인용
Web of Science 9Scopus 8
FWCI (Scopus)
0.37
JCR IF
JCR 2020 3.576
ISSN
1424-3210

저자

  1. 이용희제1저자Graduate School of Mechanical System Design, Pusan National University, Busan, 46241, Korea;
  2. 조윤호교신저자Graduate School of Mechanical System Design, Pusan National University, Busan, 46241, Korea;

초록

In this study, a modified imaging algorithm was implemented to improve the imaging accuracy for defects located on a structure. Based on analysis of the Lamb wave mode, a guided ultrasonic wave inspection technique was applied, which was able to illustrate images of defects in a 6 mm steel plate simulating containment liner plate (CLP) in nuclear power plants. The dominant Lamb wave mode was determined through short-time Fourier transform waveform analysis and imaging verification. Following tomography verification, limitations of the antisymmetric mode in the thick steel plate were identified. In addition, a modified shape factor, based on the energy distribution factor according to the beam pattern and beam width, was suggested for field applications and improved imaging accuracy. Results of the analysis revealed a beam skewing phenomenon for the Lamb wave mode. In the case of S0 2.7 MHz center dot mm, skewing as well as distortion effects are not observed in the experiment, while the S0 modes at 2.64 and 2.74 MHz center dot mm show either of them. Considering skewing width, the size of the shape function was modified. Application of the modified shape function allows us to obtain more accurate image to actual defect shape.

키워드

tomographyimage modificationmode verificationguided wavebeam pattern analysissignal processingTOMOGRAPHY

식별자

Scopus EID
2-s2.0-85107596822
WoS UID
000666469000001