Wear Behavior of Conventionally and Directly Aged Maraging 18Ni-300 Steel Produced by Laser Powder Bed Fusion
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q2
- 저널
- MATERIALS14(10) · 2021
- 피인용
- Web of Science 28Scopus 32
- FWCI (Scopus)
- 1.2
- JCR IF
- JCR 2020 3.623
- ISSN
- 1996-1944
저자
- 배기창제1저자Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
- 김도형Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
- 이욱진교신저자Dongam Division, Korea Institute of Industrial Technology, Yangsan, 50623, Korea
- 박용호교신저자Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
초록
This study aims to explore the wear performance of maraging 18Ni-300 steel, fabricated via laser powder bed fusion (LPBF). The building direction dependence of wear resistance was investigated with various wear loads and in terms of ball-on-disk wear tests. The effect of direct aging heat treatment, i.e., aging without solution heat treatment, on the wear performance was investigated by comparing the wear rates of directly aged samples, followed by solution heat treatment. The effect of counterpart material on the wear performance of the maraging steel was studied using two counterpart materials of bearing steel and ZrO2 balls. When the bearing steel ball was used as the counterpart material, both the as-built and heat-treated maraging steel produced by the LPBF showed pronounced building direction dependence on their wear performance when the applied wear load was sufficiently high. However, when the ZrO2 ball was used as the counterpart material, isotropic wear resistance was reported. The maraging steel produced by the LPBF demonstrated excellent wear resistance, particularly when it was aging heat-treated and the counterpart material was ZrO2. The directly aged sample showed wear performance almost the same as the sample solution heat-treated and then aged, indicating that direct aging can be used as an alternative post heat treatment for tribological applications of the maraging steels produced by LPBF.
키워드
maraging steeladditive manufacturinglaser powder bed fusionselective laser meltingdry sliding wearMECHANICAL-PROPERTIESHEAT-TREATMENTNANOPRECIPITATIONEVOLUTION
식별자
- Scopus EID
- 2-s2.0-85106765173
- WoS UID
- 000662624900001



로그인
연구물 목록으로