본문 바로가기

Optimization of the Projection Microstereolithography Process for a Photocurable Biomass-Based Resin

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
3D PRINTING AND ADDITIVE MANUFACTURING8(5) · pp.293 · 2021
피인용
Web of Science 6Scopus 6
FWCI (Scopus)
0.24
JCR IF
JCR 2020 5.449
ISSN
2329-7662

저자

  1. Choi, Jae Won제1저자Intelligent Manufacturing R&D Department, Korea Institute of Industrial Technology, Siheung, Republic of Korea.
  2. Kim, Seok BeomDepartment of Mechanical Engineering, Sogang University, Seoul, Republic of Korea.
  3. Son, YongIntelligent Manufacturing R&D Department, Korea Institute of Industrial Technology, Siheung, Republic of Korea.
  4. 박석희School of Mechanical Engineering, Pusan National University, Busan, Republic of Korea.
  5. Kim, Baek-JinGreen Process R&D Department, Korea Institute of Industrial Technology, Cheonan, Republic of Korea.
  6. Hong, SukjoonDepartment of Mechanical Engineering, Hanyang University, Ansan, Republic of Korea.
  7. Park, Jiyong교신저자Intelligent Manufacturing R&D Department, Korea Institute of Industrial Technology, Siheung, Republic of Korea.
  8. Ha, Cheol Woo교신저자Intelligent Manufacturing R&D Department, Korea Institute of Industrial Technology, Siheung, Republic of Korea.

초록

Biomass materials, an important source of chemical feedstocks, could replace fossil fuels as a resource in the future. The chemical feedstocks from biomass materials are used in many medical and pharmaceutical products and in fuels, chemicals, and functional materials. Biomass materials are expected to be used in biomedical engineering fields, especially due to their low biotoxicity. By the way, most of the demand for bio-application fields is an application targeted for customized production, so a high formability is required for production. Research on three-dimensional (3D) printing technology capable of satisfying these requirements has been ongoing. Manufacturing additives need to be investigated to use biomass materials as a resin or bioink safely for 3D printing, which is a technique widely used in biomedical engineering fields. In this study, a projection microstereolithography (P mu SL) system, a 3D printing technique, was made that uses a biomass-based resin. Biomass materials are designed to be photocurable for use in the P mu SL process. Various P mu SL process parameters were investigated using the biomass-based resin to determine the optimum fabrication conditions for 3D structures. This study demonstrated that a biomass-based resin can be used in the P mu SL process. We provide a method for its application in various biomedical engineering fields.

키워드

biomass-based resinthree-dimension geometry fabricationprojection microstereolithographyprocess conditionsprocess optimizationSTEREOLITHOGRAPHYFABRICATIONISOSORBIDECOMPONENTSDESIGNDEPTHMODEL

식별자

Scopus EID
2-s2.0-85117093082
WoS UID
000661608500001