INDUCTION SYSTEM WITH DEFORMATION CONTROL UNIT FOR LOCAL SOFTENING OF HOT-STAMPED PARTS
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q2KCI Q4
- 저널
- INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY22(3) · pp.621 · 2021
- 피인용
- Web of Science 0Scopus 1KCI 0
- FWCI (Scopus)
- 0.08
- JCR IF
- JCR 2020 1.269
- ISSN
- 1229-9138
저자
- 김동규제1저자School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 우영윤School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- Sim, Woo JeongAdvanced Technology Team, SEAHAN Technical Institute, Jungwang-dong, Siheung 1259-7, Gyeonggi-do, 15084, Korea
- Kim, Won HyukNKS Technical Research Institute, Gaejwa-ro 273-14, Geumjeong-gu, Busan, 46257, Korea
- 김지훈School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 문영훈교신저자School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
초록
Hot-stamped parts in a fully martensitic state exhibit very low ductility levels prior to failure, which limits their use in certain components. In the case of B-pillars, which may undergo impact loading, it could be desirable to create part zones with softer and more ductile microstructures. Local softening by means of an induction heating system is one of the methods of tailoring the properties for increasing overall energy absorption while minimizing additional manufacturing facilities. Through selective heating of the hardened zone, it is possible to form zones with very high strength and regions of reduced strength but increased ductility, resulting in a part with tailored mechanical properties. As local softening by induction heating is affected by thermomechanical properties, thermal deformation due to local heating is inevitably induced. Therefore, in this study, a local induction heating system combined with a deformation control unit is developed to minimize thermal deformation induced by local softening. The effectiveness of the system performance is strongly confirmed by the on-line application in the production line, and part qualities are significantly improved.
키워드
Hot stampingLocal softeningInduction heatingThermal deformationB-pillarHEATING-SYSTEMBORON STEELMICROSTRUCTUREFORMABILITYBLANKSALLOYFLOW
식별자
- Scopus EID
- 2-s2.0-85107041904
- WoS UID
- 000656529700008
- KCI
- ART002720851



로그인
연구물 목록으로