본문 바로가기

Synthesis and characterization of conductive polymer coated graphitic carbon nitride embedded sulfonated poly (ether ether ketone) membranes for direct methanol fuel cell applications

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
INTERNATIONAL JOURNAL OF ENERGY RESEARCH45(11) · pp.16649 · 2021
피인용
Web of Science 17Scopus 20
FWCI (Scopus)
0.67
JCR IF
JCR 2020 5.164
ISSN
0363-907X

저자

  1. Yogarathinam, Lukka Thuyavan제1저자Advanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  2. Jaafar, JuhanaAdvanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  3. Ismail, Ahmad Fauzi교신저자Advanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  4. Junoh, HazlinaAdvanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  5. Samavati, AlirezaAdvanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  6. Goh, Pei SeanAdvanced Membrane Technology Research Centre (AMTEC), School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  7. Gangasalam, ArthanareeswaranMembrane Research Laboratory, Department of Chemical Engineering, National Institute of Technology Tiruchirappalli, Tiruchirappalli, India
  8. 제롬 피터Department of Polymer Science and Engineering, Pusan National University, Busan, Republic of Korea

초록

Direct methanol fuel cell (DMFC) is a sustainable energy conversion device that is known for its advantages in terms of portability as well as can be stored and transported safely. Functionalized nanostructured materials have been used in proton exchange membrane (PEM) for DMFC applications to enhance the proton conductivity and suppress the methanol permeability. In this study, conductive polyaniline deposited oxidized graphitic carbon nitride (PANI-O-g-C3N4) was incorporated in sulfonated poly (ether ether ketone) (SPEEK) membrane for DMFC applications. The performances of graphitic carbon nitride (g-C3N4) and oxidized graphitic carbon nitride (O-g-C3N4) on SPEEK PEM were also assessed and compared. The morphological and X-ray diffraction analysis indicated that the structure and crystallinity were altered with the deposition of PANI on g-C3N4. The scanning electron microscopy and topography analysis revealed that the existence of g-C3N4 and functionalized g-C3N4 were clearly seen on the surface of the SPEEK membrane. Water uptake capacity and ion exchange capacity were significantly improved in the functionalized g-C3N4-modified SPEEK membrane (O-g-C3N4/SPEEK and PANI-O-g-C3N4/SPEEK). The lower methanol permeability and higher proton conductivity of 3.71 x 10(-7) cm(-2) S-1 and 5.34 x 10(-3) S cm(-1) were recorded by 0.1 wt% PANI-O-g-C3N4 incorporated SPEEK membrane. Functionalized g-C3N4-modified SPEEK membrane also exhibited higher oxidative stability. The performance of the PANI-O-g-C3N4 incorporated SPEEK membrane in DMFC application highlights its potential as a superior nanofiller for the modification of PEM.

키워드

direct methanol fuel cellgraphitic carbon nitridemethanol permeabilitypolyaniline deposited oxidized graphitic carbon nitrideproton conductivityPROTON-EXCHANGE MEMBRANECOMPOSITE MEMBRANEHYBRID MEMBRANEGRAPHENE OXIDEPERFORMANCENAFIONELECTROLYTENANOPARTICLESNANOSHEETSFILLER

식별자

Scopus EID
2-s2.0-85107008844
WoS UID
000656114600001