계측 기록의 설계스펙트럼 부합 가상 지진 변환 방법
Conversion of Recorded Ground Motion to Virtual Ground Motion Compatible to Design Response Spectra
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널 순위
- KCI Q2
- 저널
- 한국지진공학회논문집 (EESK)25(1) · pp.33 · 2021
- 피인용
- KCI 2
- ISSN
- 1226-525X
저자
초록
The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.
키워드
Spectral accelerationRegression equationPath attenuationEmpirical Green's function methodDesign response spectrum
식별자
- KCI
- ART002669178



로그인
연구물 목록으로