본문 바로가기

힘/토크 센서를 이용한 수술보조로봇의 원격중심운동 직접교시 알고리즘 연구

Study on Direct Teaching Algorithm for Remote Center Motion of Surgical Assistant Robot using Force/Torque Sensor

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
로봇학회 논문지15(4) · pp.309 · 2020
피인용
KCI 1
ISSN
1975-6291

저자

  1. 김민효제1저자부산대학교
  2. 진상록교신저자부산대학교

초록

This study shows a control strategy that acquires both precision and manipulation sensitivity of remote center motion with manual traction for a surgical assistant robot. Remote center motion is an essential function of a laparoscopic surgical robot. The robot has to keep the position of the insertion port in a three-dimensional space, and general laparoscopic surgery needs 4-DoF (degree-of-freedom) motions such as pan, tilt, spin, and forward/backward. The proposed robot consists of a 6-axis collaborative robot and a 2-DoF end-effector. A 6-axis collaborative robot performs the cone-shaped trajectory with pan and tilt motion of an end-effector maintaining the position of remote center. An end-effector deals with the remaining 2-DoF movement. The most intuitive way a surgeon manipulates a robot is through direct teaching. Since the accuracy of maintaining the remote center position is important, direct teaching is implemented based on position control in this study. A force/torque sensor which is attached to between robot and end-effector estimates the surgeon’s intention and generates the command of motion. The predefined remote center position and the pan and tilt angles generated from direct teaching are input as a command for position control. The command generation algorithm determines the direct teaching sensitivity. Required torque for direct teaching and accuracy of remote center motion are analyzed by experiments of panning and tilting motion.

키워드

Direct TeachingSurgical Assistant RobotRemote Center MotionForce/Torque Sensor

식별자

KCI
ART002648625