본문 바로가기

Finite element analysis of self-piercing riveting of aluminum alloy and carbon fiber reinforced polymer composites

문서 유형
연구출판물 · 학술대회 발표논문
등재
Scopus
저널 순위
Scopus Q3
피인용
Scopus 6
FWCI (Scopus)
0
ISSN
1757-8981

저자

  1. 허용찬제1저자Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241 South Korea
  2. Kim, D.Korea Institute of Material Science, 797 Changwon-daero, Seongsan-gu, Changwon-si, Gyeongsangnam-do, South Korea
  3. Lee, K. S.Korea Institute of Material Science, 797 Changwon-daero, Seongsan-gu, Changwon-si, Gyeongsangnam-do, South Korea
  4. Bae, M. G.Sungwoo Hitech, 18-2, Sojugongdan 6 street, Yangsan, Gyeongsang, South Korea
  5. Park, S. E.Sungwoo Hitech, 18-2, Sojugongdan 6 street, Yangsan, Gyeongsang, South Korea
  6. 김지훈교신저자Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241 South Korea

초록

Self-piercing riveting (SPR) is a high-speed fastening process that can join similar and dissimilar sheet materials without the need for pre-processing such as drilling or punching. During SPR processes, two overlapping sheets are joined by a rivet. The upper sheet is punched first by the rivet and then the lower sheet is deformed between the rivet and the die, creating a mechanical interlock. In this study, self-piercing riveting of aluminum alloy and carbon fiber reinforced polymer composites (CFRP) sheets was analysed using finite element simulations. For the finite element simulation of SPR processes, the orthogonal elasticity, the fracture model, and the cohesive zone model were used for describing the behaviour of CFRP. For validation of the composite material model, the punching process of CFRP was performed and the results were compared with FE predictions. The SPR process of the aluminum alloy and CFRP was simulated numerically and the performance of the joint was evaluated.

식별자

Scopus EID
2-s2.0-85097171795