Investigation into effects of blade inlet/outlet angles and trailing edge shape on flow and noise performances of circulating centrifugal fan in clothes dryer
- 문서 유형
- 연구출판물 · 학술대회 발표논문
- 등재
- Scopus
- 피인용
- Scopus 1
- FWCI (Scopus)
- 0
저자
- 최진호제1저자School of Mechanical Engineering, Pusan National University 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, Republic of Korea
- 유서윤School of Mechanical Engineering, Pusan National University 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, Republic of Korea
- 정철웅School of Mechanical Engineering, Pusan National University 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, Republic of Korea
- Jang, JinmanLG Electronics 33, Gongdan-ro 473beon-gil, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
- Seo, SeongjinLG Electronics 33, Gongdan-ro 473beon-gil, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
- Jang, CheolminLG Electronics 33, Gongdan-ro 473beon-gil, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
초록
Clothes dryers (also called tumble dryers) are powered appliances that are used to remove moisture from clothing, bedding, and other textiles. Many dryers constitute a rotating drum called a tumbler through which heated air is circulated to evaporate the moisture. Therefore, the performance and noise of the clothes dryer are greatly influenced by the circulating fan unit. Consequently, it is essential for the development of clothes dryer with high-performance and low-noise to develop a high-performance and low-noise fan unit. This study investigates the effects of blade inlet/outlet angles and the trailing edge shape on the volume flow rate and the radiated aerodynamic noise of the centrifugal fan unit used to circulate the heated air in the clothes dryer. In order to analyze the flow and noise performances of the existing centrifugal fan system, a virtual fan performance tester based on Computational Fluid Dynamics techniques is utilized. The validity of the numerical results is confirmed through the comparison of the predicted volume flow rate with the measured one. To improve the flow performance of the centrifugal fan system, the optimization of the centrifugal fan blade is carried out using the response surface method for two parameters: blade inlet and outlet angles. As a result, the optimum blade angles are obtained for the maximum volume flow rate. Then, the trailing edge shape, which is known to affect the trailing edge noise, is modified to reduce the aerodynamic noise. Two types of the trailing edge, which are of round and sharp shapes, are introduced. It is found that the noise performance, as well as the flow performance of the centrifugal fan, are improved through the application of new trailing edge shapes.
식별자
- Scopus EID
- 2-s2.0-85101409733



로그인
연구물 목록으로