본문 바로가기

Evaluation of the mechanical properties of carbon nanotube (Cnt) reinforced aluminum (6061) composites using closed die forging

문서 유형
연구출판물 · 학술대회 발표논문
등재
Scopus
저널 순위
Scopus Q3
저널
KEY ENGINEERING MATERIALS843 KEM · pp.33 · 2020
피인용
Scopus 2
FWCI (Scopus)
0
ISSN
1013-9826

저자

  1. 수레쉬바부제1저자Global Core Research Center for Ship and Offshore Plants (GCRC-SOP), Pusan National University, Busan-, 46241, Korea
  2. 박준School of Mechanical Engineering, Engineering Research Center (ERC-NSDM), Pusan National University, Busan-, 46241, Korea
  3. 강충길교신저자School of Mechanical Engineering, Engineering Research Center (ERC-NSDM), Pusan National University, Busan-, 46241, Korea

초록

In this study, the closed die forging of aluminum based composites reinforced with CNTs (1vol% and 3vol%) were investigated. Initially, the composites were fabricated using high energy ball milling followed by compaction and sintering. The microstructural results showed that finer grain size and homogeneous dispersion of CNTs were obtained. Composites with up to 97% densification were produced when fine open porosities were removed by closed die forging. The results imply that the hardness and compressive strength of composites with 3vol.% of CNTs has improved without any deterioration. In addition, workability behaviors of composites were investigated by cold upsetting test. For that pore reopening test was performed to confirm the closure of micro-pores after the closed die forged, and to further analyze the densification of the composites. Typical cases, as the pores were not re-opened even after increasing the strain, additional forming is possible up to large deformations. © 2020 Trans Tech Publications Ltd, Switzerland.

키워드

AluminumClosed die-forgingCNTMechanical properties

식별자

Scopus EID
2-s2.0-85086992333