Simultaneous adsorption and degradation of bisphenol A on magnetic illite clay composite: Eco-friendly preparation, characterizations, and catalytic mechanism
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF CLEANER PRODUCTION287 · 2021
- 피인용
- Web of Science 34Scopus 37
- FWCI (Scopus)
- 1.58
- JCR IF
- JCR 2020 9.297
- ISSN
- 0959-6526
저자
- 바오텡제1저자Department of Environmental Engineering, College of Engineering, Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, South Korea
- Damtie, Mekdimu MezemirCentre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
- Wei, WeiCentre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
- Phong Vo, Hoang NhatCentre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
- Nguyen, Khanh HoangNational Food Institute, Denmark Technical University, 2800, Kgs. Lyngby, Denmark
- Hosseinzadeh, AhmadCentre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
- 조국Department of Environmental Engineering, College of Engineering, Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, South Korea
- Yu, Zhi Min교신저자School of Biology, Food and Environment Engineering, Hefei University, China
- Jin, JieInstitute of Environmental Engineering, Hefei University, China
- Wei, Xing LaiSchool of Biology, Food and Environment Engineering, Hefei University, China
- Wu, KeInstitute of Environmental Engineering, Hefei University, China
- Frost, Ray L.Nanotechnology and Molecular Science Discipline, Faculty of Science and Engineering, Queensland University of Technology (QUT), 2 George Street, GPO Box 2434, Brisbane, QLD 4000, Australia
- Ni, Bing-Jie교신저자Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
초록
Excess bisphenol A (BPA) is a pollutant of concern in different water sources. In this work, magnetic illite clay-composite material (Fe3O4@illite) was synthesized via the coprecipitation method by loading Fe3O4 nanoparticles (nano-Fe3O4) onto the surfaces of illite clay. Results from different characterizations showed that nano-Fe3O4 was embedded into illite clay nanosheets and existed on the surfaces of illite clay, thereby reducing the degree of agglomeration and improving dispersibility. The catalytic BPA degradation of Fe3O4@illite and nano-Fe3O4 confirmed the superior performance of Fe3O4@illite compared with that of nano-Fe3O4. The optimum operating parameters for degradation were 0.3 mL of H2O2 at pH of 3 in the presence of Fe3O4@illite, which provided a maximum degradation capacity up to 816, 364, 113, and 68 mg/g for epoxy BPA concentration of resin wastewater (266 mg/L), synthetic wastewater (80 mg/L), Hefei City swan lake (25 mg/L), and Hefei University lake wastewater (14.94 mg/L), respectively, in 180 min reaction time. The degradation data conformed to the pseudo-first-order kinetic model. The degradation pathways and mineralization study revealed that the adsorption-Fenton-like reaction was the principal mechanism that demonstrated 100% degradation efficiency of Fe3O4@illite even after nine successive runs. The regeneration and reusability tendency analysis ensured that Fe3O4@illite can be easily separated by using magnets. Therefore, Fe3O4@illite composite with H2O2 Fenton-like technology was a promising method for BPA degradation. (C) 2020 Elsevier Ltd. All rights reserved.
키워드
Illite clayFenton-like reactionNano-Fe3O4Bisphenol AFe3O4@illiteFENTON-LIKE CATALYSTFERROUS-IONSHUMAN HEALTHTOXICITYREMOVALWATERBPASEPARATIONOXIDATION
식별자
- Scopus EID
- 2-s2.0-85096380046
- WoS UID
- 000611894600004



로그인
연구물 목록으로