Horizontally Assembled Trapezoidal Piezoelectric Cantilevers Driven by Magnetic Coupling for Rotational Energy Harvester Applications
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q3Scopus Q1
- 저널
- ENERGIES14(2) · 2021
- 피인용
- Web of Science 16Scopus 17
- FWCI (Scopus)
- 0.73
- JCR IF
- JCR 2020 3.004
- ISSN
- 1996-1073
저자
- Na, Yonghyeon제1저자Optic & Electronic Materials & Component Center, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
- Lee, Min-SeonOptic & Electronic Materials & Component Center, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
- 이정우Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
- Jeong, Young Hun교신저자Optic & Electronic Materials & Component Center, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
초록
Horizontally assembled trapezoidal piezoelectric cantilevers driven by magnetic coupling were fabricated for rotational energy harvester applications. A dodecagonal rigid frame with an attached array of six trapezoidal cantilevers served as a stator for electrical power generation. A rotor disk with six permanent magnets (PMs) interacted magnetically with the counterpart cantilever's tip-mass PMs of the stator by rotational motion. Each trapezoidal piezoelectric cantilever beam was designed to operate in a transverse mode that utilizes a planar Ag/Pd electrode printed onto lead zirconate titanate (PZT) piezoelectric thick film. The optimized distance between a pair of PMs of the rotor and the stator was evaluated as approximately 10 mm along the same vertical direction to make the piezoelectric cantilever beam most deflectable without the occurrence of cracks. The theoretically calculated resistance torque was maximized at 46 mN center dot m for the optimized trapezoidal piezoelectric cantilever. The proposed energy harvester was also demonstrated for wind energy harvester applications. Its harvested output power reached a maximum of approximately 22 mW at a wind speed of 10 m/s under a resistive load of 30 k omega. The output performance of the proposed energy harvester makes it possible to power numerous low-power applications such as smart sensor systems.
키워드
trapezoidal cantilevermagnetic couplingpiezoelectric bimorphmagneto-piezo-elasticenergy harvesting
식별자
- Scopus EID
- 2-s2.0-85106237942
- WoS UID
- 000611213900001



로그인
연구물 목록으로