Optimization of ultrasonic nanocrystal surface modification for surface quality improvement of directed energy deposited stainless steel 316L
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q2
- 저널
- JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T9(6) · pp.15102 · 2020
- 피인용
- Web of Science 32Scopus 36
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 5.289
- ISSN
- 2238-7854
저자
- Kim, Min Seob제1저자Division of Mechanical Engineering, Korea Maritime and Ocean University, Busan, 49112, Republic of Korea
- 박상후School of Mechanical Engineering, Pusan National University, Busan, 46241, Republic of Korea
- Pyun, Young SikDepartment of Fusion Science and Technology, Sun Moon University, Asan, 336708, Republic of Korea
- Shim, Do Sik교신저자Division of Mechanical Engineering, Korea Maritime and Ocean University, Busan, 49112, Republic of Korea
초록
Ultrasonic nanocrystal surface modification (UNSM) technology can be used for the surface treatment of specimens produced by additive manufacturing using directed energy deposition. We investigated the change in the surface quality characteristics of the treated specimens with respect to the UNSM process variables. The roughness and waviness of the deposited surface were adopted as the objective functions and the optimal process conditions were determined by the response surface method (RSM). The surface waviness and roughness were determined to be most affected by the static load, with the scanning speed having the least effect. It was observed that a smaller inter-path interval decreased the surface waviness and roughness, and an excessively large or small static load deteriorated the surface modification results. The finally optimized conditions consisted of a static load of 45 N, inter-path interval of 10 mu m, and scanning speed of 2600 mm/min. These conditions produced a surface waviness of 1.8097 mu m and roughness of 0.3297 mu m, which represent improvements of 80% and 72%, respectively, compared with the untreated specimen. It was further observed that UNSM significantly refined the material grains and considerably increased the martensite. This resulted in a surface microhardness increase of up to 71.2%. (C) 2020 The Author(s). Published by Elsevier B.V.
키워드
Ultrasonic nanocrystal surfacemodificationResponse surface methodSurface wavinessSurface roughnessDirected energy depositionSurface treatmentTI-6AL-4V ALLOYTOOL STEELFATIGUEWEARMICROSTRUCTURERESISTANCETITANIUMBEHAVIORSTRESS
식별자
- Scopus EID
- 2-s2.0-85115973189
- WoS UID
- 000606532800009



로그인
연구물 목록으로