본문 바로가기

Low-cycle fatigue evaluation for girth-welded pipes based on the structural strain method considering cyclic material behavior

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 10Scopus 11KCI 2
FWCI (Scopus)
0
JCR IF
JCR 2019 2.242
ISSN
2092-6782

저자

  1. 이진호제1저자: Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan 609-735, South Korea
  2. Dong, Pingsha: Department of Naval Architecture and Marine Engineering, University of Michigan, Ann Arbor, MI 48109, USA
  3. 김명현교신저자: Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan 609-735, South Korea

초록

One of the main concerns in the structural integrity of offshore pipelines is mechanical damage from external loads. Pipelines are exposed to fatigue failure in welded joints due to geometric discontinuity. In addition, fatigue loads such as currents, waves, and platform motions may cause significant plastic deformation and fracture or leakage within a relatively low-cycle regime. The 2007 ASME Div. 2 Code adopts the master S-N curve for the fatigue evaluation of welded joints based on the mesh-insensitive structural stress. An extension to the master S-N curve was introduced to evaluate the low-cycle fatigue strength. This structural strain method uses the tensile properties of the material. However, the monotonic tensile properties have limitations in describing the material behavior above the elastic range because most engineering materials exhibit hardening or softening behavior under cyclic loads. The goal of this study is to extend the cyclic stress-strain behavior to the structural strain method. To this end, structural strain-based procedure was established while considering the cyclic stress-strain behavior and compared to the structural strain method with monotonic tensile properties. Finally, the improved prediction method was validated using fatigue test data from full-scale girth-welded pipes. (C) 2020 Society of Naval Architects of Korea. Production and hosting by Elsevier B.V.

키워드

Girth-welded pipeMaster S-N curveStructural strain methodCyclic stress-strain curveMaster S–N curve

식별자

Scopus EID
2-s2.0-85096161293
WoS UID
000594417800071
KCI
ART002645519