Effect of alpha-Al2O3 Particle Size in a Slurry on the Physical Properties of Chemically Strengthened Thin Glass Prepared by the Spray Method
Effect of α-Al2O3particle size in a slurry on the physical properties of chemically strengthened thin glass prepared by the spray method
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- ACS OMEGA5(41) · pp.26667 · 2020
- 피인용
- Web of Science 2Scopus 3
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 2.87
- ISSN
- 2470-1343
저자
- Lee, Jung Eun제1저자Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
- Im, Hyeon-TaeOptic & Electronic Components Materials Center, Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, Jinju 52851, Republic of Korea
- Kim, Hong SeokOptic & Electronic Components Materials Center, Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, Jinju 52851, Republic of Korea
- Kim, Sun Woog교신저자Optic & Electronic Components Materials Center, Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, Jinju 52851, Republic of Korea
- Kim, Jin HoOptic & Electronic Components Materials Center, Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, Jinju 52851, Republic of Korea
- 류봉기Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
- Hwang, JongheeOptic & Electronic Components Materials Center, Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering & Technology, Jinju 52851, Republic of Korea
초록
Chemical strengthening is considered as the most suitable method for strengthening thin glass sheets used in mobile phones. The spray method of chemical strengthening requires a slurry to be sprayed on the glass sample to be strengthened. This slurry is prepared by mixing various compounds. In this study, the influence of alpha-Al2O3 particle size in the slurry on the physical properties of the chemically strengthened glass prepared by the spray method was investigated. The compressive stress (CS) was dramatically enhanced as the particle size of Al2O3 in the slurry decreased. The glass sample with 13 nm alpha-Al2O3 including the KNO-Al2O3 slurry exhibited the highest CS of 905 MPa, and the depth-of-layer (DOL) of this sample was 37 mu m. The same slurry composition also achieved the highest bending strength of 640 MPa under different heat treatment conditions. The optimization of the heat treatment conditions, such as temperature and time duration, resulted in the highest value of CS (916 MPa) obtained for the sample heated at 400 degrees C for 1.5 h, and the maximum DOL (65 mu m) was obtained for the sample at 480 degrees C for 4 h.
키워드
식별자
- Scopus EID
- 2-s2.0-85094184977
- WoS UID
- 000584420100037



로그인
연구물 목록으로