High-Resolution Three-Dimensional Sculpting of Two-Dimensional Graphene Oxide by E-Beam Direct Write
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- ACS APPLIED MATERIALS & INTERFACES12(35) · pp.39595 · 2020
- 피인용
- Web of Science 10Scopus 11
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 8.758
- ISSN
- 1944-8244
저자
- 김송길제1저자School of Mechanical Engineering, Pusan National University, Busan 46241, South Korea
- 정성엽Department of Physics, Pusan National University, Busan 46241, South Korea
- 이재광Department of Physics, Pusan National University, Busan 46241, South Korea
- 김석준School of Mechanical Engineering, Pusan National University, Busan 46241, South Korea
- Fedorov, Andrei G.교신저자George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
초록
On-demand switchable "additive/subtractive" patterning of two-dimensional (2D) nanomaterials is an essential capability for developing new concepts of functional nanomaterials and their device realizations. Traditionally, this is performed via a multistep process using photoresist coating and patterning by conventional photo or electron beam lithography, which is followed by bulk dry/wet etching or deposition. This limits the range of functionalities and structural topologies that can be achieved as well as increases the complexity, cost, and possibility of contamination, which are significant barriers to device fabrication from highly sensitive 2D materials. Focused electron beam-induced processing (FEBIP) enables a material chemistry/site-specific, high-resolution multimode atomic scale processing and provides unprecedented opportunities for "direct-write", single-step surface patterning of 2D nanomaterials with an in situ imaging capability. It allows for realizing a rapid multiscale/multimode approach, ranging from an atomic scale manipulation (e.g., via targeted defect introduction as an active site) to a large-area surface modification on nano- and microscales, including patterned doping and material removal/deposition with 2D (in-plane)/three-dimensional (3D) (out-of-plane) control. In this work, we report on a new capability of FEBIP for nanoscale patterning of graphene oxide via removal of oxygenated carbon moieties with no use of reactive gas required for etching complemented by carbon atom deposition using a focused electron beam. The mechanism of experimentally observed phenomena is explored using the density functional theory (DFT) calculations, revealing that interactions of e-beam that liberated reactive oxygen radicals with carbon atoms on the graphene basal plane lead to the creation of atomic vacancies in the material. The reaction byproducts are volatile carbon dioxides, which are dissociated and volatilized from the graphene oxide surface functional groups by interactions with an energetic focused electron beam. Along with selective subtractive patterning of graphene oxide, the same electron beam with increased irradiation doses can deposit out-of-plane 3D carbon nanostructures on top of or around the 2D etched pattern, thus forming a hybrid 2D/3D nanocomposite with a feature control down to a few nanometers. This in operando dual nanofabrication capability of FEBIP is unmatched by any other nanopatterning techniques and opens a new design window for forming 2D/3D complex nanostructures and functional nanodevices.
키워드
graphene oxidefocused electron beam-induced processing (FEBIP)reactive gas-free etchingin operando dual nanofabricationhybrid 2D/3D nanocompositeELECTRON-BEAMINDUCED DEPOSITIONCARBONENHANCEMENTREDUCTION
식별자
- Scopus EID
- 2-s2.0-85090273988
- WoS UID
- 000569268800077



로그인
연구물 목록으로