Evaluation of corrosion conditions for the steel box members by corrosion monitoring exposure test
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- CONSTRUCTION AND BUILDING MATERIALS258 · 2020
- 피인용
- Web of Science 18Scopus 20
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 4.419
- ISSN
- 0950-0618
저자
- Jin, Yong-Hee제1저자Department of Civil Engineering, Gyeongnam National University of Science and Technology, 33 Dongjin-ro, Jinju, Gyeongnam 52725, Republic of Korea
- Ha, Min-GyunDepartment of Civil Engineering, Gyeongnam National University of Science and Technology, 33 Dongjin-ro, Jinju, Gyeongnam 52725, Republic of Korea
- Jeon, Seok HyeonDepartment of Civil Engineering, Gyeongnam National University of Science and Technology, 33 Dongjin-ro, Jinju, Gyeongnam 52725, Republic of Korea
- 정영수Seismic Research and Test Center, Pusan National University, 49 Busandaehak-ro, Yansan, Gyeongnam 50612, Republic of Korea
- Ahn, Jin-Hee교신저자Department of Civil Engineering, Gyeongnam National University of Science and Technology, 33 Dongjin-ro, Jinju, Gyeongnam 52725, Republic of Korea
초록
The same bridge in the same construction site, local corrosion environmental conditions may vary depending on the local structural details or the direction of installation of the structural members. Therefore, it is necessary to confirm such relative corrosion conditions of steel bridges. In this study, the corrosion condition and relative corrosion rate of the steel box members were examined through atmospheric exposure test using a monitoring steel plate (MSP) and atmospheric corrosion monitoring (ACM) sensor. From the corrosion monitoring results, the corrosivity grades and relative corrosion rates for structural members of a steel box bridge were evaluated. (C) 2020 Elsevier Ltd. All rights reserved.
키워드
Steel box memberCorrosion monitoringCorrosivity gradeAtmospheric corrosion monitoring sensorMonitoring steel plateATMOSPHERIC CORROSION
식별자
- Scopus EID
- 2-s2.0-85089848834
- WoS UID
- 000569887400014



로그인
연구물 목록으로