본문 바로가기

Tribology Characteristics in 300 μm of Hexagonal Array Dimple Pattern

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국트라이볼로지학회지31(6) · pp.308 · 2015
피인용
KCI 2
ISSN
2713-8011

저자

  1. 최혜진제1저자부산대학교 생명산업유압연구원
  2. 권순홍부산대학교 바이오산업기계공학과
  3. 권순구부산대학교 바이오산업기계공학과
  4. 박종민부산대학교 바이오산업기계공학과
  5. 김종순부산대학교 바이오산업기계공학과
  6. 정성원부산대학교 바이오산업기계공학과
  7. 채영훈경북대학교
  8. 최원식교신저자부산대학교 바이오산업기계공학과

초록

In the tribological performance of materials, a textured surface reduces the friction coefficient and wear. This study investigates the effects of a pattern of 300 μm dimples in a hexagonal array on the tribological characteristics. Previous studies investigated 200 μm dimples by using a similar material and method. There are three frictional conditions based on the Stribeck curve: boundary friction, mixed friction, and fluid friction. In this experiment, we investigated the frictional characteristics by conducting frictional tests at sliding speeds ranging from 9.6 rpm to 143.3 rpm and a normal load ranging from 13.6 N to 92 N. We used a photolithography method to create dimples for surface texturing. We used five specimens with different dimple densities 10%, 15%, 20%, 25%, and 30% in this study. The dimple density on the surface area is one of the important factors affecting the friction characteristics. The duty number graph indicates a fully developed fluid friction regime. Fluid friction occurs at a velocity of 28.7-143.3 rpm. We observed the best performance at a dimple density of 10% and a dimple diameter of 300 μm in the hexagonal array, the lowest friction coefficient at 0.0037 with 9.6 rpm 9.6N load, and the maximum friction coefficient at 0.0267 with 143.3 rpm 92N load.

키워드

friction coefficientsurface texturingdimple patternstribeckwear

식별자

KCI
ART002073549