Pd-Au-Ag계 금속-도재용 합금의 degassing 후 냉각 속도와 추가 열처리에 따른 경화 기전
Hardening mechanism associated with additional heat treatment after degassing treatment by various cooling rates in a metal-ceramic alloy of Pd-Au-Ag system
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널
- 대한치과재료학회지42(4) · pp.271 · 2015
- 피인용
- KCI 5
- ISSN
- 2384-4434
저자
초록
Hardening mechanism associated with additional heat treatment after degassing treatment by various cooling rates in a metal-ceramic alloy of Pd-Au-Ag system was investigated. For this, surface hardness test, field emission scanning electron microscopic observations, X-ray diffraction analysis and energy dispersive X-ray spectrometer analysis were conducted. From the results of surface hardness changes during cooling specimen at various cooling rates after degassing treatment, the lowest hardness value which was obtained in the ice quenched specimen was caused by homogenization during degassing treatment. Precipitation hardening occurred effectively at slow cooling rate (stages 2, 3) after degassing treatment. In the ice quenched specimen after degassing treatment, hardening occurred remarkably by precipitation during additional heat treatment. However, increase in surface hardness by additional heat treatment did not occur in the specimen which was cooled by controlled cooling rate after degassing treatment.
키워드
Pd-Au-Ag alloyHardening MechanismHeat TreatmentCooling ratePrecipitates
식별자
- KCI
- ART002067159



로그인
연구물 목록으로