무전해 도금을 이용한 Si 태양전지 Ni-W-P/Cu 전극 형성
Formation of Ni-W-P/Cu Electrodes for Silicon Solar Cells by Electroless Deposition
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널
- 한국표면공학회지49(1) · pp.54 · 2016
- 피인용
- KCI 1
- ISSN
- 1225-8024
저자
- 김은주제1저자재료연구소
- 김광호부산대학교
- 이덕행호진플라텍
- 정운석㈜호진플라텍
- 임재홍교신저자한국기계연구원부설 재료연구소
초록
Screen printing of commercially available Ag paste is the most widely used method for the front side metallization of Si solar cells. However, the metallization using Ag paste is expensive and needs high temperature annealing for reliable contact. Among many metallization schemes, Ni/Cu/Sn plating is one of the most promising methods due to low contact resistance and mass production, resulting in high efficiency and low production cost. Ni layer serves as a barrier which would prevent copper atoms from diffusion into the silicon substrate. However, Ni based schemes by electroless deposition usually have low thermal stability, and require high annealing process due to phosphorus content in the Ni based films. These problems can be resolved by adding W element in Ni-based film. In this study, Ni-W-P alloys were formed by electroless plating and properties of it such as sheet resistance, resistivity, specific contact resistivity, crystallinity, and morphology were investigated before and after annealing process by means of transmission line method (TLM), 4-point probe, X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM).
키워드
Silicon solar cellsElectroless platingNi-W-PSpecific contact resistance
식별자
- KCI
- ART002087703



로그인
연구물 목록으로