본문 바로가기

박용엔진 피스톤 스커트 프로파일 변경에 의한마찰손실(FMEP) 저감 연구

Friction Power Loss Reduction for a Marine Diesel Engine Piston

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국트라이볼로지학회지32(4) · pp.132 · 2016
피인용
KCI 1
ISSN
2713-8011

저자

  1. 안성찬제1저자현대중공업(주) 엔진기계사업본부 엔진기계연구소 신뢰성연구실
  2. 이상돈현대중공업 엔진기계연구소
  3. 손정호현대중공업 선박해양연구소
  4. 조용주부산대학교

초록

The piston of a marine diesel engine works under severe conditions, including a combustion pressure of over 180 bar, high thermal load, and high speed. Therefore, the analyses of the fatigue strength, thermal load, clamping (bolting) system and lubrication performance are important in achieving a robust piston design. Designing the surface profile and the skirt ovality carefully is important to prevent severe wear and reduce frictional loss for engine efficiency. This study performs flexible multi-body dynamic and elasto-hydrodynamic (EHD) analyses using AVL/EXCITE/PU are performed to evaluate tribological characteristics. The numerical techniques employed to perform the EHD analysis are as follows: (1) averaged Reynolds equation considering the surface roughness; (2) Greenwood_Tripp model considering the solid_to_solid contact using the statistical values of the summit roughness; and (3) flow factor considering the surface topology. This study also compares two cases of skirt shapes with minimum oil film thickness, peak oil film pressure, asperity contact pressure, wear rate using the Archard model and friction power loss (i.e., frictional loss mean effective pressure (FMEP)). Accordingly, the study compares the calculated wear pattern with the field test result of the piston operating for 12,000h to verify the quantitative integrity of the numerical analysis. The results show that the selected profile and the piston skirt ovality reduce friction power loss and peak oil film pressure by 7% and 57%, respectively. They also increase the minimum oil film thickness by 34%.

키워드

돌기 접촉탄성윤활마찰손실최소유막두께스커트 프로파일asperity contactEHD(elasto-hydrodynamic)friction power lossminimum oil film thickness(MOFT)skirt profile

식별자

KCI
ART002155736