본문 바로가기

핵융합로 구조용 저방사화강의 용접열영향부 후열처리 균열 감수성

PWHT Cracking Susceptibility in the Weld Heat-Affected Zone of Reduced Activation Ferritic/Martensitic Steels

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
대한용접접합학회지34(6) · pp.47 · 2016
피인용
KCI 2
ISSN
2466-2232

저자

  1. 이진종제1저자한국기계연구원부설 재료연구소
  2. 문준오교신저자한국기계연구원부설 재료연구소
  3. 이창훈한국기계연구원부설 재료연구소
  4. 박준영한국기계연구원부설 재료연구소
  5. 이태호한국기계연구원부설 재료연구소
  6. 홍현욱창원대학교
  7. 조경목교신저자부산대학교

초록

Post-Weld Heat Treatment (PWHT) cracking susceptibility in the weld heat-affected zone (HAZ) of reduced activation ferritic-martensitic (RAFM) steels was evaluated through stress-rupture tests. 9Cr-1W based alloys including different C, Ta and Ti content were prepared. The coarse grained heat-affected zone (CGHAZ) samples were simulated with welding condition of 30 kJ/cm heat input. CGHAZ samples consisted of martensite matrix. Stress rupture experiments were carried out using a Gleeble simulator at temperatures of 650-750℃ and at stress levels of 125-550 MPa, corresponding to PWHT condition. The results revealed that PWHT cracking resistance was improved by Ti addition, i.e., Ti contributed to the formation of fine and stable MX precipitates and suppression of coarse M23C6 carbides, resulting in improvement of stress rupture ductility. Meanwhile, rupture strength increased with increasing solute C content.

키워드

Reduced activation ferritic/martensitic steelStress rupture testHeat-affected zonePost weld heat treatment

식별자

KCI
ART002176099