본문 바로가기

Microstructure and mechanical properties of lightweight TiC-steel composite prepared by liquid pressing infiltration process

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 40Scopus 41
FWCI (Scopus)
0
JCR IF
JCR 2019 3.562
ISSN
1044-5803

저자

  1. 이영환제1저자School of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
  2. Kim, NamkyuIndustrial Technology Support & Safety Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea
  3. Lee, Sang-BokComposites Research Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea
  4. 김양도School of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
  5. Cho, Seungchan교신저자Composites Research Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea
  6. Lee, Sang-KwanComposites Research Division, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea
  7. Jo, IlgukAdvanced Materials Engineering, Dong-Eui University, Busan 47340, Republic of Korea

초록

A TiC reinforced steel composite was fabricated by a liquid pressing infiltration (LPI) process. The TiC reinforced steel composites with density < 6.0 g/cm(3) were fabricated with a high volume fraction of TiC reinforcement. The results showed that the core-rim structure in the composite was formed by partial dissolution of the reinforcement during the LPI process. The effect of dissolution of TiC particles on the microstructure and mechanical properties of the composites was investigated. Enhanced mechanical properties are attributed to the effective load transfer from the matrix to the TiC because of the strong interfacial bonding. This interfacial stability results from chemical bonding from the partial dissolution and the precipitation of the TiC during the process. In order to establish the correlation between the core-rim structure and properties of the composite, the hardness (H) and Young's modulus (E) were examined by nano-indentation.

키워드

LightweightTiC-steel compositeLiquid pressing infiltrationMicrostructureMechanical propertyPartial dissolutionWEARSOLIDIFICATIONSTRENGTHBEHAVIORCERMETS

식별자

Scopus EID
2-s2.0-85080080347
WoS UID
000539353900026