본문 바로가기

레이저 침탄에서 페이스트 증착방식에 따른 TiZrN 코팅의 carbon solid solubility

Solid solubility of carbon in TiZrN coating by paste deposition methods for laser carburization

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국결정성장학회지30(1) · pp.7 · 2020
피인용
KCI 1
ISSN
1225-1429

저자

  1. 이성철제1저자인천대학교 신소재공학과
  2. 김성훈부산대학교
  3. 김재영고려대학교
  4. 김배연교신저자인천대학교
  5. 이희수교신저자부산대학교

초록

Carbon solubility on the paste deposition methods in the carbon-doped TiZrN coating was investigated in terms of lattice distortion and atomic concentration. After depositing the carbon paste by the dip coating, spin coating and screen printing, the laser was ablated to form the carbon gradient layer. Thickness and the concentration of doped carbon depended on the paste deposition method. Crystal structure analysis indicated that more lattice distortion occurred when coating layers were doped with spin coating and screen printing than when coating layers were doped with dip coating. The XPS depth profile showed that the thickness of carbon gradient layer by dip coating was about 30 nm, spin coating and screen printing are approximately 100 nm, formed more gradient layer. The hardness before laser carburization was about 30 GPa, and the hardness of 31 GPa with dip coating and 37 GPa with spin coating and screen printing. It was indicated that paste deposition methods for laser carburization contributed to lattice distortion and gradient layer.

키워드

Carbon-doped TiZrNLaser carburizationCarbon pasteDeposition methods

식별자

KCI
ART002562927