Delamination behavior analysis of steel/polymer/steel high-strength laminated sheets in a V-die bending test
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES173 · 2020
- 피인용
- Web of Science 16Scopus 18
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 4.631
- ISSN
- 0020-7403
저자
- 박현일제1저자Materials Deformation Department, Korea Institute of Materials Science, 797 Changwondaero, Changwon, Gyeongnam 515508, Republic of Korea
- Kim, Se-JongMaterials Deformation Department, Korea Institute of Materials Science, 797 Changwondaero, Changwon, Gyeongnam 515508, Republic of Korea
- Lee, JinwooMaterials Deformation Department, Korea Institute of Materials Science, 797 Changwondaero, Changwon, Gyeongnam 515508, Republic of Korea
- 김지훈School of Mechanical Engineering, Pusan National University, 2 Busandaehak-ro 63beon-gil, Busan 609-735, Republic of Korea
- Kim, Daeyong교신저자Materials Deformation Department, Korea Institute of Materials Science, 797 Changwondaero, Changwon, Gyeongnam 515508, Republic of Korea
초록
Steel/polymer/steel laminated sheets were fabricated by inserting three types of adhesive layers between two 590-MPa grade high-strength steel sheets. V-die bending tests of the laminated sheets were conducted and the results showed that the delamination behaviors depended on the inserted adhesive type. To investigate the mechanical behaviors of the adhesive layers, delamination tests for each adhesive layer along normal and shear directions were performed. Based on the results of the delamination tests, an inverse parameter characterization using an iterative finite element simulation with interface elements was successfully conducted to characterize the cohesive properties for mixed-mode bilinear cohesive zone model that clearly described the measured load-displacement curves. The results of the V-die bending tests were predicted through simulations using the characterized cohesive properties; the delamination patterns, punch force drop, and entire level of punch force agreed well with the experimental results. Delamination mechanisms were deduced based on parametric studies conducted to elucidate the direct effect of cohesive properties on delamination.
키워드
Laminated sheetV-bending testDelamination behaviorCohesive zone modelCOMPOSITE BONDED JOINTSCOHESIVE ZONE LENGTHSINGLE-LAP JOINTSFORMING SPEEDSIMULATIONVIBRATIONADHESIVESPRINGBACKMETALSMODEL
식별자
- Scopus EID
- 2-s2.0-85078437591
- WoS UID
- 000531024300007



로그인
연구물 목록으로