본문 바로가기

박판이 부착된 사각노즐에서 분사되는 Sweeping jet의 유동 및 열전달 특성

Heat transfer and flow characteristics of sweeping jet issued from rectangular nozzle with thin plate

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국가시화정보학회지17(2) · pp.1 · 2019
피인용
KCI 0
ISSN
1598-8430

저자

  1. 김동욱제1저자부산대학교
  2. 정재훈부산대
  3. 서현덕부산대학교
  4. 김현동부산대학교
  5. 김경천교신저자부산대학교

초록

This study investigated heat transfer and flow characteristics of a sweeping jet issued from a rectangular nozzle with a thin plate. A thin vertical aluminum plate was attached on outlet of fluidic oscillator to increase velocity of central area with Coanda effect and enhance heat transfer performance. From visualization and PIV experiments, sweeping jet with a thin plate has larger velocity distribution in center region than that of the normal sweeping jet while oscillating frequency is similar as the normal one. Thermographic phosphor thermometry method was used to visualize the temperature field and Nu distribution of plate with impinging sweeping jet with thin plate. Four Reynolds numbers and three jet-to-wall distances were selected as parameters. It is found that heat transfer performance in the low jet-to-wall spacing was enhanced as the cooled area was expanded. However, when the jet-to-wall spacing became greater than 8dh, heat transfer performance became similar due to reduced impinging velocity.

키워드

유체진동기박판 부착 노즐인광기반 온도측정입자영상유속계코안다 효과Fluidic oscillatorNozzle with thin platePhosphor ThermometryParticle Image VelocimetryCoanda effect

식별자

KCI
ART002498588