본문 바로가기

Manufacturing of bent tubes with non-uniform curvature and cross-section using a novel hydroforming die: experimental, finite element analysis, and optimization

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 7Scopus 9
FWCI (Scopus)
0
JCR IF
JCR 2019 2.633
ISSN
0268-3768

저자

  1. Ghorbani, H.제1저자교신저자Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
  2. 김지훈School of Mechanical Engineering, Pusan National University, Busan, South Korea
  3. Hosseinzadeh, M.Department of Mechanical Engineering, Islamic Azad University Sari Branch, Sari, Iran
  4. Gorji, A.Department of Mechanical Engineering, Noshirvani University of Technology, Babol, Iran
  5. Ghasempour-Mouziraji, M.Department of Material Science and Engineering, Shanghai Jiao Tong University, Shanghai, China

초록

Producing non-uniformly curved tubes with sharp corners using the common experimental methods in hydroforming process is difficult. A common approach is to increase the internal pressure as high as possible; which may lead to excessive thinning and fracture on the corners of the tubes. To manufacture this type of tubes, the current study has proposed a new hydroforming die to perform such a process by taking two general steps: initial bulging and forming. The proposed die facilitated with two movable bushes is able to produce bended stainless steel tubes with non-uniform curvature and cross-section. To find the optimum pressure and axial feed profiles, finite element simulations were performed, and the results were validated with experiments. The main advantage of this die is that by moving the bushes inside the die cavity, the friction between die and bushes can be reduced considerably while axial feeding is provided properly, leading to produce a tube with a uniform thickness distribution and maximum achievable corner filling.

키워드

Bent tubesHydroformingFinite element analysisOptimizationLUBRICATIONIMPROVEMENTPARAMETERSDESIGN

식별자

Scopus EID
2-s2.0-85081629033
WoS UID
000524949100054