Ti-TiH2 혼합 분말의 레이저 직접 용융 공정을 이용한 다공성 티타늄 부품 제조 연구
Fabrication of Porous Titanium Parts by Direct Laser Melting of Ti-TiH2 Mixing Powder
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널
- 소성∙가공28(1) · pp.21 · 2019
- 피인용
- KCI 0
- ISSN
- 1225-696X
저자
초록
Direct Laser Melting (DLM) of Ti- χTiH2 (mixing ratio χ = 2, 5, 10 wt.%) blended powder is characterized by producing porous titanium parts. When a high energy laser is irradiated on a Ti-TiH2 blended powder, hydrogen gas (H2) is produced by the accompanying decomposition of the TiH2 powder, and acts as a pore-forming and activator. The hydrogen gas trapped in a rapidly solidified molten pool, which generates porosity in the deposited layer. In this study, the effects of a TiH2 mixing ratio and the associated processing parameters on the development of a porous titanium were investigated. It was determined that as the content of TiH2 increases, the resulting porosity density also increases, due to the increase of H2 produced by TiH2. Also, porosity increases as the scan speed increases. As fast solidified melting pools do not provide enough time for H2 to escape, the faster the scan speed, the more the resulting H2 is captured by the process. The results of this study show that the mixing ratio (χ) and laser machining parameters can be adjusted to actively generate and control the porosity of the DLM parts.
키워드
Direct Laser MeltingPorosityProcessing ParametersTitanium Hydride
식별자
- KCI
- ART002435792



로그인
연구물 목록으로