CMP 연마패드의 동적 점탄성에 관한 유한요소해석
Finite Element Analysis on Dynamic Viscoelasticity of CMP Polishing Pad
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCIScopus
- 저널 순위
- Scopus Q4
- 저널
- 한국정밀공학회지36(2) · pp.177 · 2019
- 피인용
- Scopus 2KCI 2
- FWCI (Scopus)
- 0.09
- ISSN
- 1225-9071
저자
- 박병준제1저자School of Mechanical Engineering, Graduate School, Pusan National University, South Korea
- 이다솔School of Mechanical Engineering, Graduate School, Pusan National University, South Korea
- 정선호School of Mechanical Engineering, Graduate School, Pusan National University, South Korea
- 김현진School of Mechanical Engineering, Graduate School, Pusan National University, South Korea
- 정해도교신저자School of Mechanical Engineering, Graduate School, Pusan National University, South Korea
초록
Finite element analysis of CMP process was studied to understand uneven pressure distribution between polishing pad and wafer. Since WIWNU (Within wafer non-uniformity) is mainly influenced by dynamic viscoelastic properties of CMP polishing pad, the dynamic property of the polishing pad has to be understood first for dynamic finite element analysis of the process. To measure viscoelasticity of the polishing pad, time-dependent strain data by load were obtained using a viscoelasticity measurement system capable of measuring deformation by periodic load. Primary and secondary elastic modulus and relaxation time could be achieved for the behavior of the polishing pad by load. Finite element analysis was carried out under the same conditions as viscoelastic measurement. Material properties of the polishing pad were assumed based on results of experiments. By comparing experimental results with analytical results, material properties in the analytical model were modified and FEA was carried out again. It was confirmed that the behavior of the polishing pad by load in the experiment and FEA according to modified material properties were well matched. Through this process, viscoelastic properties of polishing pad were well defined for dynamic analysis of CMP process.
키워드
화학적 기계적 평탄화점탄성유한요소해석동적 재료 물성Chemical mechanical planarizationViscoelasticityFinite element analysisDynamic material properties
식별자
- Scopus EID
- 2-s2.0-85061303255
- KCI
- ART002434947



로그인
연구물 목록으로