Investigation of the Effects of Magnesium-Sulfate as Slag Activator
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- MATERIALS13(2) · 2020
- 피인용
- Web of Science 10Scopus 11
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 3.057
- ISSN
- 1996-1944
저자
- Kang, Choonghyun제1저자Department of Ocean Civil Engineering, Gyeongsang National University, Tongyeong 53064, Korea. chkang@gnu.ac.kr
- 김태완교신저자Department of Civil Engineering, Pusan National University, Busan 46241, Korea
초록
This study is about the mechanical and microstructural properties of alkali-activated slag (AAS) paste using magnesium sulfate (MS) as an activator. MS is 2%, 4%, 6%, 8% and 10% contents of binder weight and water-binder ratio is 0.35. Compressive strength, X-ray diffraction, mercury-intrusion porosimetry, and thermal analysis were performed for analysis. The MS contents at which the maximum compressive strength appeared varied according to the measurement age. Hydration products affecting compressive strength and pore structure were ettringite and gypsum. As a result, the changes of ettringite and gypsum depending on the contents of MS have a great influence on the pore structure, which causes the change of compressive strength. The high MS contents increases the amount of gypsum in the hydration products, and the excess gypsum causes high expansion, which increases the diameter and amount of pores, thereby reducing the compressive strength.
키워드
alkali-activated slagmagnesium sulfateettringitegypsumpore structureBLAST-FURNACE SLAGMECHANICAL-PROPERTIESAUTOGENOUS SHRINKAGEHYDRATION KINETICSALKALISTRENGTHDURABILITYPRODUCTSCONCRETEPASTES
식별자
- Scopus EID
- 2-s2.0-85079791452
- WoS UID
- 000515499900052



로그인
연구물 목록으로