Facile Process for Surface Passivation Using (NH4)(2)S for the InP MOS Capacitor with ALD Al2O3
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- MATERIALS12(23) · 2019
- 피인용
- Web of Science 6Scopus 7
- FWCI (Scopus)
- 0.37
- JCR IF
- JCR 2018 2.972
- ISSN
- 1996-1944
저자
- 이정섭제1저자Department of Orthopaedic Surgery and Medical Research Institute, Pusan National University Hospital, 179 Gudeok-ro, Seo-gu, Busan 49241, Korea; jungsublee@pusan.ac.kr; falconbleu@daum.net (T.Y.A.)
- 안태영교신저자Department of Orthopaedic Surgery and Medical Research Institute, Pusan National University Hospital, 179 Gudeok-ro, Seo-gu, Busan 49241, Korea; jungsublee@pusan.ac.kr; falconbleu@daum.net (T.Y.A.)
- Kim, DaewonDepartment of Electronic Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin 17104, Korea; daewon@khu.ac.kr (D.K.)
초록
Ammonium sulfide ((NH4)(2)S) was used for the passivation of an InP (100) substrate and its conditions were optimized. The capacitance-voltage (C-V) characteristics of InP metal-oxide-semiconductor (MOS) capacitors were analyzed by changing the concentration of and treatment time with (NH4)(2)S. It was found that a 10% (NH4)(2)S treatment for 10 min exhibits the best electrical properties in terms of hysteresis and frequency dispersions in the depletion or accumulation mode. After the InP substrate was passivated by the optimized (NH4)(2)S, the results of x-ray photoelectron spectroscopy (XPS) and the extracted interface trap density (D-it) proved that the growth of native oxide was suppressed.
키워드
III-V semiconductorindium phosphide (InP)Al2O3(NH4)(2)Ssulfur passivationSYSTEMSULFUR
식별자
- Scopus EID
- 2-s2.0-85075843493
- WoS UID
- 000510178700113



로그인
연구물 목록으로