본문 바로가기

Multi-Functional Cr-Al-Ti-Si-N Nanocomposite Films Deposited on WC-Co Substrate for Cutting Tools

문서 유형
연구출판물 · 학술지 논문
등재
SCIE
저널
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY20(7) · pp.4390 · 2020
피인용
Web of Science 5
JCR IF
JCR 2019 1.134
ISSN
1533-4880

저자

  1. 김왕렬제1저자부산대학교, 공과대학, 재료공학부, KO
  2. Heo, Sungbo한국생산기술연구원, KO
  3. Kim, Jun-Ho한국생산기술연구원, KO
  4. Park, In-Wook교신저자한국생산기술연구원, KO
  5. 정원섭교신저자부산대학교, 공과대학, 재료공학부, KO

초록

Multi-functional quinary Cr-Al-Ti-Si-N thin films were deposited onto WC-Co substrates using a cathodic arc evaporation system. In this study, the influence of silicon contents on the microstructure, mechanical, tribological, and oxidation properties of Cr-Al-Ti-Si-N thin films were systematically investigated and correlated for application of cutting tools. Based on results from various analyses, the Cr-Al-Ti-Si-N films showed excellent properties including mechanical, tribological, oxidation and adhesion values compared with those of the Cr-Al-Ti-N film. The Cr-Al-Ti-Si-N films with a Si content of around 4.21 at.% exhibited the highest hardness of 45 GPa, very low friction coefficient of 0.38 at room temperature against an Inconel alloy ball and superior adhesion property (105 N). The Cr-Al-Ti-Si-N films also showed excellent oxidation resistance after annealing in the ambient air at 1000 degrees C. Therefore, the Cr-Al-Ti-Si(4.21 at.%)-N films could be help to improve the performance of machining and cutting tools with application of the films.

키워드

Multi-Functional PropertiesCr-Al-Ti-Si-N FilmsNanocompositeCutting ToolsOXIDATION RESISTANCECOATINGSMICROSTRUCTURESCR-1-XALXN

식별자

WoS UID
000508646300073