Effect of spray nozzle position on pad temperature distribution and wafer non-uniformity
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY33(12) · pp.5677 · 2019
- 피인용
- Web of Science 1Scopus 1KCI 0
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2018 1.221
- ISSN
- 1738-494X
저자
- 이기훈제1저자School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 이다솔School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 정선호School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 이동환School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
- 정해도교신저자School of Mechanical Engineering, Pusan National University, Busan, 46241, Korea
초록
During chemical mechanical planarization (CMP), the pad surface temperature generally increases due to the friction between the wafer and the pad. A pad with a large sliding distance generates more heat compared to pad with small sliding distance. A nonuniform temperature distribution on the pad causes its mechanical properties to become uneven, which are affected by within-wafer non-uniformity (WIWNU). This study aims to improve the polishing uniformity by controlling the temperature profile of the pad surface for each spray nozzle position. When the slurry was sprayed on an area for which a large slide distance was measured, a uniform temperature distribution and improved WIWNU were obtained.
키워드
CMPSpray nozzleCooling effectTemperature profileWIWNUSLURRY NOZZLEHEAT
식별자
- Scopus EID
- 2-s2.0-85077205579
- WoS UID
- 000504965100010
- KCI
- ART002529391



로그인
연구물 목록으로