Characterization of mechanical behavior in repaired FC300 using directly deposited AISI-P21 and AISI-H13 metal powders
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE234(1-2) · pp.157 · 2020
- 피인용
- Web of Science 9Scopus 11
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 1.982
- ISSN
- 0954-4054
저자
- 유재현제1저자School of Mechanical Engineering, Pusan National University, Busan, Korea
- Lee, Ki YongGreen Manufacturing Process Group, KITECH, Gwangju, Korea
- Shim, Do-Sik교신저자Division of Mechanical Engineering-Major of Marine Equipment, Korea Maritime and Ocean University, Busan, Korea
- 박상후ERC/NSDM, School of Mechanical Engineering, Pusan National University, Busan, Korea
초록
Remanufacturing is a promising technique for reducing manufacturing costs and material usage. This work presents a method for repairing casting parts using an additive metal-layer deposition process. To determine characteristics and mechanical properties of parts repaired using the proposed additive metal-layer-deposition-based method, tensile specimens were designed with grooves measuring 1 mm and 3 mm in depth. Two specific metal powders, AISI-P21 (SCM440) and AISI-H13 (SKD61), were melted using a highly focused laser, and molten droplets were subsequently built up layer-by-layer to fill-in the grooves. Mechanical and metallurgical characteristics of repaired parts were investigated via tensile and hardness tests and microstructural analyses. Experimental results demonstrate that the ultimate strength of specimens repaired using the proposed additive metal-layer deposition method measured approximately 9% lower compared with that of FC300. However, the mechanical strength of additive metal-layer deposition specimen was increased about 22% compared with that of welded specimen. Through this work, we can make a conclusion that the additive metal-layer deposition technique is well-suited for the repair and reproduction of castings.
키워드
Additive metal-layer deposition (AMD)gray cast iron (FC300)castingAISI-P21 (SCM440)AISI-H13 (SKD61)metal powderlaser processingDUCTILE CAST-IRONLASEROPTIMIZATIONALLOY
식별자
- Scopus EID
- 2-s2.0-85064887718
- WoS UID
- 000505095300014



로그인
연구물 목록으로