본문 바로가기

Pulse Shaper를 이용한 SHPB 실험 응력파 제어 효과의 해석 및 실험적 검증

Numerical and Experimental Verification of Stress Wave Control Effect in SHPB Experiment using Pulse Shaper

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
소성∙가공26(5) · pp.314 · 2017
피인용
KCI 2
ISSN
1225-696X

저자

  1. 김용희제1저자부산대학교
  2. 우민아부산대학교
  3. 강범수부산대학교
  4. 김정교신저자부산대학교

초록

In the high-speed forming analysis, dynamic material properties considering a high strain rate are required. The split Hopkinson pressure bar (SHPB) experiment was performed for measuring dynamic material properties under high strain rate. The pulse shaping method was used to improve the accuracy of the SHPB experiment. A pulse shaper attached to the front of the incident bar was used for specimen dynamic stress equilibrium through stress wave control. Numerical analysis and SHPB test were performed to verify whether the pulse shaper affects the dynamic stress equilibrium in copper and Al6061 specimens. The results of SHPB test and numerical analysis show that the pulse shaper contributes to the dynamic stress equilibrium. Based on the improved stress equilibrium using a pulse shaper, the flow stress curves for copper and Al6061 materials were obtained at strain rates of 1344.4/sec and 1291.6/sec, respectively.

키워드

Dynamic Material PropertiesSplit Hopkinson Pressure BarPulse ShaperStress Wave Control

식별자

KCI
ART002264354