CBAPC 바인더로 제조한 인공사 중자의 강도 및 내습성에 미치는 P/Al 몰 비와 경화 조건의 영향
Effect of P/Al Molar Ratio and Curing Conditions of CBAPC Binder on Flexural Strength and Moisture Resistance of Artificial Sand Core
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- Korean Journal of Metals and Materials57(12) · pp.808 · 2019
- 피인용
- Web of Science 2Scopus 2KCI 4
- FWCI (Scopus)
- 0.18
- JCR IF
- JCR 2018 0.992
- ISSN
- 1738-8228
저자
- 오현곤제1저자2Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
- Park, DongKook1Green Materials & Processes Group, Korea Institute of Industrial Technology (KITECH), Ulsan 44413, Republic of Korea
- 김양도교신저자2Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
- Lee, Man Sig1Green Materials & Processes Group, Korea Institute of Industrial Technology (KITECH), Ulsan 44413, Republic of Korea
초록
CBAPC (chemically bonded aluminum phosphate ceramic) binders have various advantages, including superior corrosion resistance and strength at high temperature. They are also a non-toxic and eco-friendly material. We investigated an inorganic binder based on CBAPC using artificial sand for casting. The CBAPC binders were synthesized with various P/Al molar ratios from 2.0 to 6.0. Specimens were prepared by mixing the artificial sand and CBAPC binder, and then heat-treating at 260 degrees C for 10 min. The prepared CBAPC binders were characterized using TGA/DSC, XRD, FT-IR, and FE-SEM. The artificial sands (Esperal 40, Cps 1) were characterized by XRF, grain size analysis, and FE-SEM. The ultimate flexural strengths obtained for the artificial sands (Esperal 40, Cps 1) were 6.40 and 6.36 MPa, respectively, under the conditions P/Al=4.5, curing temperature=260 degrees C, and curing time=10min. The CBAPC_4.5 had higher thermal stability at low temperature than the samples with other P/Al molar ratios. The AlH2P3O10 center dot 2H(2)O structure formed at 260 degrees C exhibited high mechanical strength and moisture resistance with improved flexural strength. The effect on the surfaces of the CBAPC_4.5 coated artificial sands depended on the curing temperature and curing time. We confirmed that the P/Al molar ratio and curing conditions strongly affected flexural strength.
키워드
artificial sandcastingCBAPC binderflexural strengthmoisture resistanceALUMINUM PHOSPHATE BINDERCRYSTAL-STRUCTUREPERFORMANCECOMPOSITESCHEMISTRYMECHANISMBINDINGFORM
식별자
- Scopus EID
- 2-s2.0-85077441406
- WoS UID
- 000502093400008
- KCI
- ART002530287



로그인
연구물 목록으로