본문 바로가기

3D 프린팅 기술을 활용한 낙상충격 보호패드 구조설계 및 필라멘트 소재에 따른 특성 비교

Structure Design of Fall Impact Protection Pad Using 3D Printing Technology and Comparison of Characteristics According to Filament Material

문서 유형
연구출판물 · 학술지 논문
등재
KCIScopus
저널
한국의류학회지41(5) · pp.939 · 2017
피인용
KCI 7
ISSN
1225-1151

저자

  1. 박정현제1저자부산대학교
  2. 정희경부산대학교
  3. 이정란교신저자부산대학교

초록

This study uses 3D printing technology to design and fabricate a fall impact protection pad with a spacer fabric structure. The design of the pads consists of hexagonal three-dimensional units connected in a honeycomb shape; in addition, the unit consists of a surface layer and a spacer layer. Protect pads were designed as either a hexagonal type or diamond type according to the surface layer structure; subsequently, a spacer filament was also designed as the most basic I-shape type. Designed pads were printed using four types of flexible filaments to select suitable material for a fall impact protection pad. Impact protection performance and bending stiffness were evaluated for the eight type of pad outputs. As a result of the impact protection performance evaluation, when the force of 6,500N was applied, the force passed through the pad was in the range of 1,370-2,132N. FlexSolid® and Skinflex TM showed good protection performance and cubicon flexible filament showed the lowest protection. NinjaFlex® was found to be the most flexible in the bending stiffness evaluation.

키워드

3D 프린팅 기술낙상충격 보호패드스페이서 패브릭충격보호성능굽힘 강성3D printing technologyFall impact protection padSpacer fabricImpact protection performanceBending stiffness

식별자

KCI
ART002281460