본문 바로가기

전기분해/응집을 이용한 폐SCF 내 T-N 처리 특성

Characteristics of Total Nitrogen Removal in Wasted Soluble Cutting Fluids (SCF) by Electrolysis/Electro Coagulation

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국폐기물자원순환학회지34(7) · pp.678 · 2017
피인용
KCI 1
ISSN
2093-2332

저자

  1. 장성호제1저자부산대학교
  2. 김고은교신저자부산대학교 바이오환경에너지학과
  3. 배종명부산대학교 바이오환경에너지학과
  4. 홍성철부산대학교
  5. 서정민부산대학교
  6. 이재용경운대학교
  7. 박진식경운대학교
  8. 문추연경운대학교

초록

The use of Soluble Cutting Fluids (SCF) is essential in the development of industrial technology. However, it is difficultto decompose biologically due to its high concentrations of organic substances and nitrogen compounds, which interfere withmicrobial growth. Recently, Advanced Oxidation Processes are being studied both domestically and internationally. Electrolysisis highly adaptable industrial wastewater treatment because it has high removal efficiency and short processing time, regardlessof the contaminant’s biodegradable nature. Accordingly, this study shows the characteristics of total nitrogen removal in SCFon the operating time, current density, and electrolytes when using aluminum in a batch-type reactor. The results are as follows:① Under the condition of without the electrolyte when the current density was adjusted to 40 A/m2, 60 A/m2, or 80 A/m2,the respective T-N removal efficiencies were 71.7%, 80.6%, and 87.2% at 60 min. ② In the comparison for the condition ofwhether NaCl was added, the removal efficiency of adding NaCl (5 ~ 10 mM) was higher than non-addition at 60 min forall current densities. ③ In the comparison for the condition of whether Na2SO4 (5 ~ 10 mM) was added, the removal efficiencywhen adding Na2SO4 showed no significant difference compared to non-addition at 60 min for all current densities.

키워드

T-NElectrolysisElectro coagulationSoluble Cutting Fluids (SCF)

식별자

KCI
ART002281324