실사이드 부품의 롤포밍공정에서 고주파유도가열 부가조건에 따른 기계적 특성 및 미세조직 평가
Characteristics of Mechanical Properties and Micro Structure according to High-Frequency Induction Heating Conditions in Roll Forming Process of a Sill Side Part
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널
- 한국기계가공학회지16(6) · pp.87 · 2017
- 피인용
- KCI 4
- ISSN
- 1598-6721
저자
초록
Hot stamping processes are possible for tensile strength 1.4 GPa but the strength reduction is appeared from the cooling performance unbalance. And the strength of roll forming process is below than that of hot stamping process owing to using the steel which is lower strength of boron steel. In this study, We provide roll forming process asssisted high-frequency induction heating to solve the problem of conventional one. The experiments were carried out at under various sill side part conditions: high-frequency induction heating conditions of 15, 18, 21, 24, 27 and 30 kW. The high-frequency induction heating temperature was checked with Infrared camera and the sill side parts of mechanical properties and microstructure were measured. The heating temperature of high frequency induction was measured to max 850 ℃ under the coil power of 30 kW. The tensile strength was 1.5 GPa and hardness was 490 Hv. The martensite structure was discovered under coil power of 30 kW. The weight of steel material sill side having thickness 1.5 mm and the boron steel sill side having thickness 1.2 mm were compared to weight effect. The boron steel sill side reduced 11.5 % compared to steel. Consequently, manufacturing process of 1.5 giga-grade’s sill side part was successfully realized by the roll forming assisted high-frequency induction heating methods.
키워드
실사이드고주파 유도가열롤포밍보론강기가급 강재Sill SideHigh Frequency Induction HeatingRoll FormingBoron SteelGIGA-Grade Steel
식별자
- KCI
- ART002295265



로그인
연구물 목록으로