본문 바로가기

고속 성형 공정에서 재료의 구성 방정식 파라메터 획득을 위한인공신경망 모델의 적용

Application of an Artificial Neural Network Model to Obtain Constitutive Equation Parameters of Materials in High Speed Forming Process

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
소성∙가공27(6) · pp.331 · 2018
피인용
KCI 9
ISSN
1225-696X

저자

  1. 우민아제1저자부산대학교
  2. 이승민부산대학교
  3. 이경훈부산대학교
  4. 송우진부산대학교
  5. 김정교신저자부산대학교

초록

Electrohydraulic forming (EHF) process is a high speed forming process that utilizes the electric energy discharge in fluid-filled chamber to deform a sheet material. This process is completed in a very short time of less than 1ms. Therefore, finite element analysis is essential to observe the deformation mechanism of the material in detail. In addition, to perform the numerical simulation of EHF, the material properties obtained from the high-speed status, not quasi static conditions, should be applied. In this study, to obtain the parameters in the constitutive equation of Al 6061-T6 at high strain rate condition, a surrogate model using an artificial neural network (ANN) technique was employed. Using the results of the numerical simulation with free-bulging die in LS-DYNA, the surrogate model was constructed by ANN technique. By comparing the z-displacement with respect to the x-axis position in the experiment with the z-displacement in the ANN model, the parameters for the smallest error are obtained. Finally, the acquired parameters were validated by comparing the results of the finite element analysis, the ANN model and the experiment.

키워드

Electrohydraulic FormingHigh Speed FormingConstitutive EquationArtificial Neural Network

식별자

KCI
ART002410853