본문 바로가기

Assembly Mechanism and the Morphological Analysis of the Robust Superhydrophobic Surface

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q2
저널
COATINGS9(8) · 2019
피인용
Web of Science 7Scopus 8
FWCI (Scopus)
0.3
JCR IF
JCR 2018 2.33
ISSN
2079-6412

저자

  1. Kim, Doeun제1저자Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering and Technology, Jinju, Gyeongnam 52851, Korea shbelly@kicet.re.kr
  2. Sasidharanpillai, ArunElectronic Convergence Materials Division, Korea Institute of Ceramic Engineering and Technology, Jinju, Gyeongnam 52851, Korea shbelly@kicet.re.kr
  3. 윤기훈Department of Convergence engineering, Pusan National University, Busan 46241, Korea
  4. Lee, YounkiDepartment of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju, Gyeongnam 52828, Korea
  5. Yun, Dong-JinAnalytical Engineering Group, Samsung Advanced Institute of Technology, Suwon 440-600, Korea
  6. Park, Woon IkElectronic Convergence Materials Division, Korea Institute of Ceramic Engineering and Technology, Jinju, Gyeongnam 52851, Korea shbelly@kicet.re.kr
  7. Bang, JiwonElectronic Convergence Materials Division, Korea Institute of Ceramic Engineering and Technology, Jinju, Gyeongnam 52851, Korea shbelly@kicet.re.kr
  8. Lee, Seunghyup교신저자Electronic Convergence Materials Division, Korea Institute of Ceramic Engineering and Technology, Jinju, Gyeongnam 52851, Korea shbelly@kicet.re.kr

초록

Robust superhydrophobic surfaces are fabricated on different substrates by a scalable spray coating process. The developed superhydrophobic surface consists of thin layers of surface functionalized silica nanoparticle (SiO2) bound to the substrate by acrylate-polyurethane (PU) binder. The influence of the SiO2/PU ratio on the superhydrophobicity, and the robustness of the developed surface, is systematically analyzed. The optimized SiO2/PU ratio for prepared superhydrophobic surfaces is obtained between 0.9 and 1.2. The mechanism which yields superhydrophobicity to the surface is deduced for the first time with the help of scanning electron microscopy and profilometer. The effect of mechanical abrasion on the surface roughness and superhydrophobicity are analyzed by using profilometer and contact angle measurement, respectively. Finally, it is concluded that the binder plays a key role in controlling the surface roughness and superhydrophobicity through the capillary mechanism. Additionally, the reason for the reduction in performance is also discussed with respect to the morphology variation.

키워드

robust superhydrophobic surfacesurface assembly mechanismsurface disintegration mechanismCOATINGSFABRICATIONWATERFACILESILICAFILMSPOLYURETHANEDEPOSITIONROUGHNESSCORROSION

식별자

Scopus EID
2-s2.0-85071147249
WoS UID
000482996800045