Compensation of Arm Current Sensor Errors in Modular Multilevel Converter
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS55(5) · pp.5005 · 2019
- 피인용
- Web of Science 11Scopus 12
- FWCI (Scopus)
- 1.6
- JCR IF
- JCR 2018 3.347
- ISSN
- 0093-9994
저자
- 네게세 베레떼 베라이네제1저자Pusan National University, Busan, 46241 South Korea
- 박창환Pusan National University, Busan, 46241 South Korea
- 김장목교신저자Pusan National University, Busan, 46241 South Korea
초록
The modular multilevel converter (MMC) is an attractive topology for medium- or high-power applications due to its high modularity, scalability, and high-power quality. Even if a direct modulated control algorithm guarantees a stable operation for the MMC system, it is unable to suppress the flow of a negative sequence second order leg current in the MMC. Mostly, for circulating current suppression, a PI controller in the double fundamental frequency rotating reference frame is adopted. The three-phase leg currents are calculated using the average of upper and lower arm currents of the respective phase after they are measured by arm current sensors. However, the previous circulating current suppression controllers do not consider the offset and scale error of the arm current sensors. This paper proposes an algorithm to compensate the offset and scale error of the arm current sensors. The proposed algorithm is easy to be implemented and effectively suppresses the leg current components caused by the current sensor errors. The validity of the proposed algorithm is verified through both simulation and experimental results.
키워드
Circulating currentcirculating-current suppression controller (CCSC)modular multilevel converter (MMC)offset erroroffset error compensationscale errorscale error compensation
식별자
- Scopus EID
- 2-s2.0-85071294841
- WoS UID
- 000482584200058



로그인
연구물 목록으로