본문 바로가기

Analysis of contact and bending stiffness for Curvic couplings considering contact angle and surface roughness

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q4Scopus Q2
피인용
Web of Science 11Scopus 14
FWCI (Scopus)
0.16
JCR IF
JCR 2018 1.126
ISSN
0954-4089

저자

  1. 유용훈제1저자Department of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 이보라Department of Mechanical Engineering, Pusan National University, Busan, South Korea
  3. 조용주교신저자Department of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

This paper develops a method for calculating the contact and bending stiffness of a Curvic coupling, and investigates stiffness changes according to the coupling shape and surface roughness characteristics. The surface of the on-site Curvic coupling is chosen as reference for a most accurate simulation. The three parameters representing the surface roughness characteristics-the standard deviation of the asperity height distribution, the average radius of asperities, and the density of asperity on the nominal contact area-are calculated with a profile of the coupling surface through a random process: the contact problem between rough surfaces is tackled using the Greenwood-Williamson model, the Curvic coupling is modeled assuming that it has as many teeth as possible within the machining limits depending on the contact angle, and the tangential stiffness resulting from the contact angle is calculated by dividing into the stick and slip regions, and is taken into account in terms of total stiffness. With this, results showed that using Curvic couplings reduces stiffness than using flat disc couplings because of the contact angle, and that the standard deviation of rough surface height is the most crucial surface parameter affecting stiffness.

키워드

Curvic couplingcontact stiffnessbending stiffnesssurface roughnessGreenwood-Williamson modelELASTOPLASTIC HEMISPHERICAL CONTACT

식별자

Scopus EID
2-s2.0-85070377913
WoS UID
000476363200001