Effect of the Film Thickness on the Work Function of Pt-Ru Bimetallic Alloy Films by Atomic Layer Deposition
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q3
- 저널
- JOURNAL OF THE KOREAN PHYSICAL SOCIETY75(1) · pp.1 · 2019
- 피인용
- Web of Science 5Scopus 5KCI 1
- FWCI (Scopus)
- 0.21
- JCR IF
- JCR 2018 0.63
- ISSN
- 0374-4884
저자
- 김창민제1저자School of Materials Science and Engineering, Pusan National University, Busan, South Korea
- 이우재School of Materials Science and Engineering, Pusan National University, Busan, South Korea
- 베라수산타School of Materials Science and Engineering, Pusan National University, Busan, South Korea
- 권세훈교신저자School of Materials Science and Engineering, Pusan National University, Busan, South Korea
초록
The work function (WF) of Pt-Ru bimetallic alloy (BA) films prepared by atomic layer deposition (ALD) was systemically investigated depending on the thickness. Pt-Ru BA films were deposited using a supercycle consisted of 10 subcycles for Pt and 1 subcycle for Ru. And, the thicknesses of Pt-Ru BA films were carefully controlled from 2.9 to 35.7 nm through changing the number of supercycles. Although a fixed ALD supercycle was used, the composition of Pt-Ru BA films was gradually changed and then saturated to Pt: similar to 92 at.% and Ru: similar to 8 at.% with increasing the film thickness. In addition, the microstructural evolution of Pt-Ru BA films happened from island-like nuclei to continuous film at an initial growth stage. As a result, the WF and electrical resistivity of ALD Pt-Ru BA films exhibited saturated values of similar to 5.36 eV and similar to 19.95 mu ohm<bold>cm</bold>, respectively at higher than 8.7 nm thickness.
키워드
식별자
- Scopus EID
- 2-s2.0-85068790325
- WoS UID
- 000475631400001
- KCI
- ART002486505



로그인
연구물 목록으로