고증폭용 다단 지렛대형 유연 힌지의 최적 설계
Optimal Design of a Multi-Layer Lever Type Flexure Hinge for High Magnification
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCIScopus
- 저널 순위
- Scopus Q4
- 저널
- 한국정밀공학회지35(12) · pp.1191 · 2018
- 피인용
- Scopus 0KCI 0
- FWCI (Scopus)
- 0
- ISSN
- 1225-9071
저자
초록
This study investigated the role of multi-layer lever type flexure hinges for high magnification of piezoelectric actuators and their optimal design. In order to obtain a displacement higher than 700 µm with a common PZT actuator of displacement less than 15 µm, the magnification ratio of a flexure hinge must be at least 50 or higher. Under a limited compact space, a multi-layer lever structure represents a useful alternative. Restricting the important design parameters to the number of layers and rotational stiffness of notch, the maximum required input displacement/force and the maximum output displacement were analyzed according to the number of layers. The two-layer structure was selected as the best option for large magnification ratio because the required input displacement was drastically reduced. FEM analysis revealed that the lever thickness should be larger than 12 mm to exhibit a rigid body behavior. The output displacement was 664 µm, which was less than 704 µm expected in the design stage. It might be attributed to elastic deformation of the notches of 1st and 2nd layers, which was not considered in the design stage.
키워드
고증폭 다단 유연힌지노치 두께PZT 변위PZT 최대 지지력High magnificationMulti-layer flexure hingeNotch thicknessPZT displacementPZT blocking force
식별자
- Scopus EID
- 2-s2.0-85057740492
- KCI
- ART002407104



로그인
연구물 목록으로