Material characteristics of random glass-mat-reinforced thermoplastic under cryogenic thermal cycles
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q4Scopus Q3
- 저널
- SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS26(1) · pp.270 · 2019
- 피인용
- Web of Science 4Scopus 5
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2018 0.705
- ISSN
- 0334-181X
저자
- Park, Kwang-Jun제1저자Gas Technology RandD Group, Daewoo Shipbuilding and Marine Engineering, Seoul, Korea
- 김정현Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea
- 김슬기Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea
- Heo, Haeng-SungGas Technology RandD Group, Daewoo Shipbuilding and Marine Engineering, Seoul, Korea
- 배진호Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea
- 이제명교신저자Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea
초록
In this study, cryogenic (77 K) to ambient (293 K) thermal shocks are induced to investigate the material behavior and failure characteristic of a random glass-matreinforced thermoplastic (GMT). The GMT has numerous advantages such as robust thermal conductivity, good mechanical strength, and good impact resistance. Hence, the GMT serves as an insulation material in liquefied natural gas (LNG) carrier-cargo containment systems (CCSs). In this study, 50, 100, 200, 400, and 800 cryogenic thermal cyclic shocks (77 K to 293 K) were applied to the fabricated GMT samples. The time for each cycle was 40 min, and it took up to approximately four months to completely apply the thermal cyclic shock to the specimens. The elongation, tensile strength, and elastic modulus of the testing samples obtained from the stress-strain relationship and morphologies were investigated in terms of the number of thermal cyclic shocks and strain rate. Finally, explicit formulae were proposed considering the parameters such as material properties and number of cryogenic thermal cycles to predict the material capabilities under arbitrary loading rates and cryogenic thermal cycles. It was confirmed that the degradation and defects increased with an increase in the number of cryogenic thermal cycles.
키워드
glass-mat-reinforced thermoplasticcryogenicthermal cyclic shockstiffness degradationFIBERFRACTUREGMTPERFORMANCECOMPOSITESDESIGN
식별자
- Scopus EID
- 2-s2.0-85068147516
- WoS UID
- 000474908500001



로그인
연구물 목록으로