Improvement in Reactivity and Pollutant Emission by Cofiring of Coal and Pretreated Biomass
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- ENERGY & FUELS33(5) · pp.4331 · 2019
- 피인용
- Web of Science 26Scopus 26
- FWCI (Scopus)
- 0.63
- JCR IF
- JCR 2018 3.021
- ISSN
- 0887-0624
저자
- 김종호제1저자Pusan Clean Coal Center, School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
- Lee, Young-JooKorea Institute of Energy Research (KIER), 152, Gajeong-ro, Yuseong-gu, Daejeon 34129, Republic of Korea
- Yu, JianglongChemical Engineering and International Collaborative Centre for Carbon Futures, University of Newcastle, Callaghan, New South Wales 2308, Australia
- 전충환교신저자Pusan Clean Coal Center, School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
초록
A fuel pretreatment technique is one of the most effective ways of using biomass fuel to solve problems including disadvantages of low calorific value, slagging, and fouling. Biomass fuel can gain a high calorific value and lower ash content by torrefaction and ash removal technology, respectively. In this study, a thermogravimetric analysis for deriving combustion parameters and the combustion characteristic factor (S) and an evolved gas analysis for investigating emission characteristics were studied by using a thermogravimetric Fourier transform infrared (TG-FTIR) system with coal, biomass, pretreated biomass, and their blends (10, 20, and 30%) to evaluate the combustibility and environmental performance. In the thermogravimetric analysis, coal and ashless biomass blends showed the greatest combustion performance and were confirmed to have a higher S index. Gas emissions (CO2, CO, NO, and SO2) were also investigated during the combustion process (O-2, 21%; N-2, 79%) to compare coal and biomass blends with coal and pretreated biomass blends. These results, including the emission peak and integral value, generally decreased as the biomass blending ratio increased except for the NO emission. The SO2 emission decreased only with an increase in the ashless biomass owing to the lower sulfur content in ashless biomass. Overall, this study indicated that blending pretreated biomass, especially ashless biomass, is more effective toward better cocombustion and environmental behavior as the biomass blending ratio increases.
키워드
COMBUSTION BEHAVIORCOCOMBUSTION CHARACTERISTICSTORREFIED BIOMASSALKALI-METALSFOOD WASTEBLENDSPYROLYSISRESIDUEFTIRSO2
식별자
- Scopus EID
- 2-s2.0-85065907023
- WoS UID
- 000468365400068



로그인
연구물 목록으로