본문 바로가기

L형상 프로파일 링롤링 공정의 하부면 그루브 결함 분석

Analysis of the Bottom Groove in L-shaped Profile Ring Rolling

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
소성∙가공27(5) · pp.289 · 2018
피인용
KCI 0
ISSN
1225-696X

저자

  1. 오일영제1저자부산대학교
  2. 황태우부산대학교
  3. 강필규부산대학교
  4. 문영훈교신저자부산대학교

초록

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

키워드

Profile Ring RollingL-shapedSurface DefectFE Simulation

식별자

KCI
ART002392399