본문 바로가기

Improvement of the MARS subcooled boiling model for a vertical upward flow

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q2
저널
NUCLEAR ENGINEERING AND TECHNOLOGY51(4) · pp.977 · 2019
피인용
Web of Science 14Scopus 14KCI 2
FWCI (Scopus)
0.74
JCR IF
JCR 2018 1.546
ISSN
1738-5733

저자

  1. 하태욱제1저자School of Mechanical Engineering, Pusan National University, Busan, 46241 South Korea
  2. 정재준교신저자School of Mechanical Engineering, Pusan National University, Busan, 46241 South Korea
  3. 윤병조School of Mechanical Engineering, Pusan National University, Busan, 46241 South Korea

초록

In the thermal-hydraulic system codes, such as MARS and RELAP5/MOD3, the Savannah River Laboratory (SRL) model has been adopted as a subcooled boiling model. It, however, has been shown that the SRL model cannot take into account appropriately the effects of inlet liquid velocity and hydraulic diameter on axial void fraction development. To overcome the problems, Ha et al. (2018) proposed a modified SRL model, which is applicable to low-pressure and low-Pe conditions (P < 9.83 bar and Pe <= 70,000) only. In this work, the authors extended the modified SRL model by proposing a new net vapor generation (NVG) model and a wall evaporation model so that the new subcooled boiling model can cover a wide range of thermal-hydraulic conditions with pressures ranging from 1.1 to 69 bar, heat fluxes of 97-1186 kW/m(2), Pe of 3600 to 329,000, and hydraulic diameters of 5-25.5 mm. The new model was implemented in the MARS code and has been assessed using various subcooled boiling experimental data. The results of the new model showed better agreements with measured void fraction data, especially at low-pressure conditions. (C) 2019 Korean Nuclear Society, Published by Elsevier Korea LLC.

키워드

Subcooled boilingNet vapor generationWall evaporationEffects of inlet liquid velocity and hydraulic diameterLOW-PRESSUREVOID FRACTIONONSETPREDICTIONINSTABILITYCHANNEL

식별자

Scopus EID
2-s2.0-85066028155
WoS UID
000468474600007
KCI
ART002473295